5.8GHz 200MW wireless audio video RF RC FPV transmitter...

5.8GHz 200MW wireless audio video RF RC FPV

transmitter & receiver lightweight

Specifications:

5.8G 200mW,8 channels transmitter and receiver,1km range in open area,

12V power input,light and ultra mini size,Cool heat sink 

FXT 5.8G 200mW, 8 channels transmitter and receiver kit A great option to those

whom want to do FPV without interference problems with 2.4 GHz R/C radios  

Features: 

1. Transmission about 1km range in the open area 

2. 8 channels selectable tx and rx( 5705-5945mhz) 

3. Universal video transmitter receiver for all, competible with kinds of remote control toys(helicopter,    quadcopter, multicopter, airplane, boat, car, motorcycle etc) 

4. Built in mini fan and cool heat sink ( tx )to keep it away from over heating 

5. Lightweight (32g) and mini size tx ( 55x26x17 mm )  

Warm Tips 

The transmitter's power input is ranging from 7-12V, however the voltage output from the TX for the camera us 0.5V, lower than the input power. It's suggested to use 3S lipo 11.1V battery.

1.   Better for the transmitter power to be 12V, 12V 3S battery and 12V AC power are both OK. 

2.  Better for the transmitter works at open area to avoid kinds of interference for the perfect performance. 

3.   Antennas must be attached before power on in avoidance of burning out hazards. 

4.   Any action for changing the antenna or screwing off the antenna, power off first.