Commercial Fiber Media Converter pr. stk.

Commercial Fiber

Media Converter pr. stk.

LNK-1100S-25 

Product Name:

Commercial Fiber Media Converter

Product Model:

LNK-1100 Series

Highlights

•  Complies with 802.3u 10/100Base-TX, 100Base-FX standards 

•  Link Fault Passthrough (LFP) Function

•  Half-Duplex / Full-Duplex transfer mode for FX port 

•  Extends fiber distance up to 120km 

•  External Power Supply

Category:

IP CCTV over Fiber ConverterDue to its unique function of link failure

alert between electrical port and optical one, the intelligent 10/100M 

adaptive fast Ethernet media converter can replace the media converter

with network management to greatly reduce the system cost. LNK-1100

Ethernet media converter can interconvert electrical

signals of 10Base-T and 100Base–TX twisted pairs with optical signals of

100Base-FX.

It extends the network transmission distance from 100m via copper cables to 120km 

via fiber optical cable. It enables the data to transmit in two different mediums of

electrical and optical networks either by the technology of data link L2 store-and-forward,

or by the one of PHY L1 cut-through).It supports transmission in multi-mode dual fiber,

single mode dual fiber and single mode single fiber.

Specification:

· 10/100Mbps auto-sensed, facilitating network upgrade

· Built-in efficient switching core to implement flow control and reduce broadcast packets·

full-duplex and half-duplex auto-sensed

· Supporting auto-sense of MDI/MDI-X, facilitating system commissioning

and installation 

· Supporting Link Failure Alert (LFA) optional

· Supporting half /full-duplex of FX and link failure alert with optional dip-switch 

· Supporting 10/100Mbps store-and-forward and 100Mbps cut-through

transmission with optional dip-switch

· Supporting the transmission of 100Base-Fx or STM-1, compatible with other devices

· Supporting low-time lag transmission

· Supporting the transmission of extra-long packets up to1600 bytes

· Supporting the transmission of extra-long VLAN packets

· Supporting Quality of Service (QoS) , ensuring the transmission of VoIP packets

· Extremely low power consumption (less than 2W), low heat,

reliable and stable performance,and long lifetime;

· Options in single mode dual fiber, multi-mode dual fiber, and single mode in single fiber

 



Parameter Specifications Access mode 10/100Mbps Standard IEEE802.3 10Base-T Ethernet, IEEE802.3u, 100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control Wavelength 850nm/1310nm/1550nm Transmission  distance Dual-fiber multi-mode: 2 km;  Dual-fiber single mode: 20/40/60/80/100/120 km;  Single fiber single mode: 20/40/60/80/100 km Category-5 twisted pairs: 100m Port One RJ45 port: for connecting STP/UTP category-5 twisted pairs One optical port: Multi-mode, dual fiber: SC or ST (50, 62.5/125μm) Single mode, dual fiber: SC or FC (9/125μm) Single mode Single fiber: SC or FC (9/125μm) Conversion  means Store and Forward mode or Cut-Through mode Buffer space Built in 128Kb RAM for data buffer Flow control Full duplex: flow control;  Half duplex: back pressure BER <19-9 MTBF 100,000 hours LED indicator POER (power supply); FX LINK/ACT (optical link action);  FDX (FX full duplex),TX LINK/ACT (TP cable link/action);  TX 100 (TP cable rate 100M), FX100(fiber cable rate 100M) Power supply External: AC90~264V/DC100~380V input, 5V1A output Internal: AC90~264V/DC100~380V input Power  consumption <40W (the chassis at full load), <2W Operating  temperature -10~55ºC  Operating  humidity 5%~90%  Maintaining  temperature -40~70ºC Maintaining humidity 5% ~ 90% non-condensing